Asus ROG STRIX B365-F GAMING - Onboard Connectors and Features

ROG STRIX B365-F GAMING
1-9
Chapter 1
1.1.6 Onboard jumpers
1. Clear RTC RAM jumper
TheClearRTCRAMjumperallowsyoutocleartheRealTimeClock(RTC)RAM
intheCMOS,whichcontainsthedate,time,systempasswords,andsystemsetup
parameters.
ToerasetheRTCRAM:
1. TurnOFFthecomputerandunplugthepowercord.
2. Short-circuitpin1-2withametalobjectorjumpercapforabout5-10seconds.
3. PlugthepowercordandturnONthecomputer.
4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetupto
re-enter data.
DONOTshort-circuitthepinsexceptwhenclearingtheRTCRAM.Short-circuitingor
placing a jumper cap will cause system boot failure!
Ifthestepsabovedonothelp,removetheonboardbuttoncellbatteryandmovethe
jumperagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,reinstallthe
button cell battery.