Asus ROG STRIX B365-F GAMING - PCH-FW Configuration; Onboard Devices Configuration

3-16
Chapter 3: BIOS Setup
Chapter 3
3.6.7 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and congure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Denition Audio Controller.
Conguration options: [Disabled] [Enabled]
PCIEX16_2, PCIEX1_1, PCIEX1_2 switch
[Auto mode] PCIEX16_2 will run at x4, both PCIEX1_1 and PCIEX1_2 will be disabled
by default. If an x1 device is inserted in PCIEX1_1 or PCIEX1_2 slots, it
will auto-detect and PCIEX16_2 will run at x2.
[x4 mode] PCIEX16_2 will run at x4, both PCIEX1_1 and PCIEX1_2 will always be
disabled.
M.2_1, PCIEX1_3 switch
[Auto mode] M.2_1 will run at x4, PCIEX1_3 will be disabled by default. If an x1 device
is inserted in PCIEX1_3 slot, it will auto-detect and M.2_1 will run at x2.
[x2 mode] M.2_1 will run at x4, PCIEX1_3 will always be disabled.
M.2_1 Configuration
[Auto] Auto-detects the M.2 device mode. If a SATA device is detected,
SATA6G_1 will be disabled.
[SATA mode] Only supports M.2 SATA devices. Please note that SATA6G_1 port
cannot be used in this mode.
[PCIE mode] Only supports M.2 PCIE devices.
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Conguration options: [On] [Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Conguration options: [On] [Off]
3.6.6 PCH-FW Configuration
This item allows you to congure the rmware TPM.
Hot Plug
These items appears only when the SATA Mode Selection is set to [AHCI] and allows
you to enable or disable SATA Hot Plug Support.
Conguration options: [Disabled] [Enabled]