2-8
Chapter 2: Basic Installation
Chapter 2
• To install an M.2 using the removable M.2 Q-Latch screw (Type 2242, 2260,
2280 M.2）
A. (optional) Remove the M.2 rubber pad.
Follow this step only if you wish to install an M.2 to type 2242.
B. (optional) If required, remove the pre-installed removable M.2 Q-Latch screw at
the 2280 length screw hole.
C. Install the M.2 Q-Latch to the M.2 length screw hole you wish to install your M.2
to.
D. Rotate and adjust the M.2 Q-latch so that the handle points away from the M.2
slot.
E. Install your M.2 to the M.2 slot.
F. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
To Next Page
Loading...
