2-10
Chapter 2: Basic Installation
Chapter 2
OPTIONAL
• To install an M.2 to M.2_1 and M.2_3 slot
For 2280 length
A. (optional) Install the bundled rubber for M.2 if you are installing a
single sided M.2 storage device. DO NOT install the bundled rubber
for M.2 when installing a double-sided M.2 storage device. The rubber
installed by default is compatible with double sided M.2 storage
devices.
B. Rotate and adjust the M.2 Q-latch so that the handle points away
from the M.2 slot.
C. Install your M.2 to the M.2 slot.
D. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
To Next Page
Loading...
