Asus ROG STRIX B760 Series - Page 32

32
ROG STRIX B760 Series BIOS Manual
CPU L2 Voltage
Allows you to select the voltage for the CPU L2. This may help sustain high clock speeds.
Conguration options: [Auto] [Manual Mode]
The following item appears when you set CPU L2 Voltage to [Manual Mode].
- CPU L2 Voltage Override
Allows you to congure the voltage for the CPU L2. Use the <+> or <-> keys to adjust
the value, or key in [Auto] and press the <Enter> key to apply the optimized setting.
Conguration options: [Auto] [0.700] – [1.800]
CPU System Agent Voltage
Allows you to select the voltage for the CPU System Agent. Conguration options: [Auto]
[Manual Mode] [Offset Mode]
[Manual Mode] Allows user-dened values.
[Offset Mode] Modies values by SVID.
The following item appears when you set CPU System Agent Voltage to [Manual Mode].
- CPU System Agent Voltage Override
Allows you to congure the voltage for the CPU System Agent. Use the <+> or <->
keys to adjust the value, or key in [Auto] and press the <Enter> key to apply the
optimized setting. Conguration options: [Auto] [0.700] – [1.600]
The following two items appear when you set CPU System Agent Voltage to [Offset
Mode].
- CPU System Agent Voltage Offset
Allows you to congure the CPU System Agent voltage offset value. Save changes and
reset the system for the change to take effect.
Conguration options: [Auto] [0.001] – [0.999]
CPU Input Voltage
Allows you to congure the voltage for the CPU Input.Use the <+> or <-> keys to adjust the
value, or key in [Auto] and press the <Enter> key to apply the optimized setting.
Conguration options: [Auto] [1.500] – [2.100]
DRAM Voltage
Allows you to congure the voltage for the DRAM. Use the <+> or <-> keys to adjust the
value, or key in [Auto] and press the <Enter> key to apply the optimized setting.
Conguration options: [Auto] [1.00000] – [1.80000]
IVR Transmitter VDDQ Voltage
Allows you to set the voltage for the internal transmitter voltage for the Memory Controller.
Use the <+> or <-> keys to adjust the value, or key in [Auto] and press the <Enter> key to
apply the optimized setting.
Conguration options: [Auto] [0.70000] – [2.20000]