Asus ROG STRIX B760 Series - PCH Configuration; PCH Storage Configuration

ROG STRIX B760 Series BIOS Manual
39
RC6(Render Standby)
Allows you to enable or disable Render Standby support. Conguration options:
[Enabled] [Disabled]
VMD setup menu
Allows you to congure the VMD Conguration parameters.
Enable VMD controller
Allows you to enable or disable VMD controller. Conguration options: [Enabled]
[Disabled]
Map PCIE Storage under VMD
Allows you to enable or disable PCIE Storage under VMD. Conguration options:
[Enabled] [Disabled]
Map SATA Controller under VMD
Allows you to enable or disable VMD controller. Conguration options: [Enabled]
[Disabled]
PCI Express Conguration
Allows you to congure the PCI Express options.
M.2_1 Link Speed
Conguration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4]
PCIEX16(G5) Link Speed
Conguration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4] [Gen5]
7.4 PCH Conguration
The items in this menu allow you to set the PCH parameters.
PCI Express Conguration
Allows you to congure the PCI Express Conguration settings.
PCIEX16(G4) / PCIEX16(G4)_1/ PCIEX16(G4)_2 / M.2_2 Link Speed
Allows you to set the PCIe speed.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4]
7.5 PCH Storage Conguration
The items in this menu show the PCH Storage Conguration options. While entering Setup,
the BIOS automatically detects the presence of SATA devices. The SATA Port items show
Empty if no SATA device is installed to the corresponding SATA port.