Asus ROG STRIX X470-F GAMING - Page 31

ROG STRIX X470-F GAMING BIOS Manual
31
SATA Port Enable
This item allows you to enable or disable the SATA Device. Conguration options: [Disabled]
[Enabled]
SATA Mode
This item allows you to set the SATA conguration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID conguration from
the SATA hard disk drives.
NVMe RAID mode
This item allows you enable or disable the NVMe RAID mode. Conguration options:
[Disabled] [Enabled]
SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Conguration options: [On] [Off]
SATA6G_1(Black) - SATA6G_6(Black)
SATA6G_1 - SATA6G_6
This item allows you to rename the selected SATA port. Conguration options: [OK]
[Cancel]
Hot Plug
These items appears only when the SATA Mode is set to [AHCI] and allows you to
enable or disable SATA Hot Plug Support. Conguration options: [Disabled] [Enabled]
M.2_1(Black), M.2_2(Black)
Click to assign a new name for the M.2 port.