40
ROG STRIX X470-F GAMING BIOS Manual
Chassis Fan 1/2/3 Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the Chassis Fan 1/2/3
temperature. The Chassis Fan 1/2/3 will operate at the maximum duty
cycle when the temperature source is higher than the limit.
Chassis Fan 1/2/3 Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum Chassis Fan 1/2/3 duty
cycle. When the temperature source reaches the upper limit, the Chassis
Fan 1/2/3 will operate at the maximum duty cycle.
Chassis Fan 1/2/3 Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the Chassis Fan 1/2/3
temperature.
Chassis Fan 1/2/3 Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the Chassis Fan 1/2/3 middle duty cycle.
Chassis Fan 1/2/3 Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the Chassis Fan 1/2/3
temperature. The Chassis Fan 1/2/3 will operate at the minimum duty cycle
when the temperature source is lower than the limit.
Chassis Fan 1/2/3 Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum Chassis Fan 1/2/3 duty
cycle. When the temperature source is under the limit, the Chassis Fan
1/2/3 will operate at the minimum duty cycle.
AIO_Pump/W_Pump+ Control
[Disabled] Disable the AIO_Pump/W_Pump+ control feature.
[Auto] Detects the type of AIO_Pump/W_Pump+ installed and
automatically switches the control modes.
[DC mode] Enable the AIO_Pump/W_Pump+ control in DC mode for 3-pin
chassis fan.
[PWM mode] Enable the AIO_Pump/W_Pump+ control in PWM mode for 4-pin
chassis fan.
The following items appear only when you set the AIO_Pump/W_Pump+ Control to
[Auto], [DC mode] or [PWM mode].
AIO_Pump/W_Pump+ Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the AIO_Pump/W_
Pump+ temperature.
AIO_Pump/W_Pump+ Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum AIO_Pump/W_Pump+
duty cycle. When the CPU temperature reaches the upper limit, the AIO_
Pump/W_Pump+ will operate at the maximum duty cycle.
AIO_Pump/W_Pump+ Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the AIO_Pump/W_
Pump+ temperature.
To Next Page
Loading...
