3-2
Chapter 3: General Instructions
• MaxRefreshRate: Allows you to select a maximum refresh rate of 170Hz
(Only for DisplayPort input). After selecting, press the
( ) button to
activate the setting.
• Overclocking may cause screen ickering. To reduce such effects,
disconnect the DisplayPort cable and use the monitor OSD menu to try
again with a safer Max. Refresh rate.
• This function is only available when DisplayPortVer. is DisplayPort
1.2+HDR.
• OD: Improves the gray level response time of the LCD panel.
This function is not available when ELMBSYNC is enabled.
• Adaptive-Sync(DP)/VariableRefreshRate:Allows an Adaptive-Sync supported*
graphics source to dynamically adjust display refresh rate based on typical content
frame rates for power efficient, virtually stutter free and low-latency display update.
• *Adaptive-Sync(DP)/VariableRefreshRate can only be activated
within 48Hz~144Hz for HDMI and 48Hz~170Hz for DisplayPort.
• This function is only available when DisplayPortVer. is DisplayPort
1.2+HDR.
• *For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
• ELMBSYNC: Allows you to turn on the function when Adaptive-Sync(DP)/
VariableRefreshRate is On. This function eliminates screen tearing, reduces
ghosting and motion blur when playing games.
When Adaptive-Sync(DP)/VariableRefreshRate is Off, this function can
only be activated when the refresh rate is 120Hz, 144Hz, 155Hz, 160Hz or
165Hz.
• GamePlus: See 1.3.3GamePlusFunction for details.
• GameVisual: See 1.3.4GameVisualFunction for details.
• ShadowBoost: Dark color enhancement adjusts monitor gamma curve to enrich
the dark tones in an image, making dark scenes and objects much easier to be
seen.
This function is only available in Racing mode, RTS/RPG mode, FPS mode,
sRGB mode or User mode.