3-6
Chapter 3: General Instructions
: Sets the sound related settings from this menu.
: The adjusting range is from 0 to 100.
: Toggles the monitor sound between on and off.
: Turns On/Off the USB Hub function during standby mode.
This function is not available (set as ) when is
enabled.
Turns the power LED indicator on/off.
Enables or disables the power key.
: To disable all function keys. Press over 5 seconds to cancel the key
lock function.
:
• Adjusts the OSD timeout from 10 to 120 seconds.
• Enables or disables the DDC/CI function.
• Adjusts the OSD background from opaque to transparent.
: Compatibility with graphic card. Select or
by graphic card DP version.
is only available when and
are off.
: Shows the monitor information.
: Selecting “Yes” allows you to restore the default settings.
To Next Page
Loading...
