3-6
Chapter 3: General Instructions
• Sound: Sets the sound related settings from this menu.
• Volume: The adjusting range is from 0 to 100.
• Mute: Toggles the monitor sound between on and off.
• USB Hub: Turns On/Off the USB Hub function during standby mode.
This function is not available (set as On During Standby) when Aura Sync is
enabled.
• Power Indicator: Turns the power LED indicator on/off.
• Power Key Lock: Enables or disables the power key.
• Key Lock: To disable all function keys. Press over 5 seconds to cancel the key
lock function.
• OSD Setup:
• Adjusts the OSD timeout from 10 to 120 seconds.
• Enables or disables the DDC/CI function.
• Adjusts the OSD background from opaque to transparent.
• DisplayPort Ver.: Compatibility with graphic card. Select DisplayPort 1.1 or
DisplayPort 1.2+HDR by graphic card DP version.
DisplayPort 1.1 is only available when Overclocking and Adaptive-Sync (DP)
are off.
• Information: Shows the monitor information.
• All Reset: Selecting “Yes” allows you to restore the default settings.
To Next Page
Loading...
