Asus ROG STRIX Z370-E GAMING - Onboard Leds

ASUS ROG STRIX Z370-E GAMING
1-11
Chapter 1
1.1.7 Onboard LEDs
1. POST State LEDs
ThePOSTStateLEDsprovidethestatusofthesekeycomponentsduringPOST
(Power-OnSelf-Test):CPU,memorymodules,VGAcard,andharddiskdrives.Ifan
errorisfound,thecriticalcomponentsLEDstayslitupuntiltheproblemissolved.
2. Standby Power LED
ThemotherboardcomeswithastandbypowerLED.TheLEDlightsuptoindicatethat
thesystemisON,insleepmode,orinsoft-offmode.Thisisareminderthatyoushould
shutdownthesystemandunplugthepowercablebeforeremovingorplugginginany
motherboardcomponent.TheillustrationbelowshowsthelocationoftheonboardLED.
®
STRIX Z370-E GAMING
ROG STRIX Z370-E GAMING
CPU/DRAM/BOOT_DEVICE/VGA LED
BOOT (YELLOW GREEN)
CPU (RED)
VGA (WHITE)
DRAM (YELLOW)
®
STRIX Z370-E GAMING
ROG STRIX Z370-E GAMING PWR_LED
PWR_LED