Asus ROG Strix Z370-F Gaming - Page 24

1-10
Chapter 1: Product Introduction
Chapter 1
2. CPU over voltage jumper (3-pin CPU_OV)
The CPU over voltage jumper allows you to set a higher CPU voltage for a exible
overclocking system, depending on the type of the installed CPU. To gain more CPU
voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage
setting, insert the jumper to pins 1-2.
®
ROG STRIX Z370-F GAMING CPU_OV setting
3. 3D Mount
Secure 3D printed parts to these 3D Mount holes for a personalized motherboard.
• Download 3D source les at http://www.asus.com.
• Use the bundled 3D Mount screws to install the 3D printed parts.
®
ROG STRIX Z370-F GAMING 3D Printing Mount
3D Mount
3D Mount
3D Mount