Please power off, remove the external graphics card firstly and connect the monitor cable to the
display output of the integrated graphics card, as indicated in below green marked. If the
external graphics card was not removed, there will have no display on the monitor. If connecting
to the display output of the integrated graphics card can works, it implies that there may be a
problem with the external graphics card, external graphics card may need repair service.
(Note: The outputs from the graphics card may vary from its series and models)
d. Confirm that the output interface of the monitor is consistent with the setting, please set the
correct output interface(when the monitor can't detect signal automatically)
12. Remove external devices
If the display problem still persists, please follow the instructions below to remove all the
external devices and confirm again.
a. Keep the CPU, CPU radiator fan and a single RAM memory installed on the motherboard
b. Remove all the USB devices and external cards from the Motherboard including the mouse,
keyboard, card reader, flash drives, external hard drives, external PCI-E Cards, etc.
To Next Page
Loading...
