ROG STRIX Z490-E BIOS Manual
45
Memory Configuration
This item allows you to set memory configuration parameters.
Memory Remap
This item allows you to enable or disable memory remap above 4GB.
Configuration options: [Enabled] [Disabled]
Graphics Configuration
This item allows you to select a primary display from CPU and PCIe graphical devices.
Primary Display
This item allows you to select the primary display from CPU and PEG devices.
Configuration options: [Auto] [CPU Graphics] [PEG]
iGPU Multi-Monitor
Set this item to [Enabled] to empower both integrated and discrete graphics for multi-
monitor output. iGPU shared system memory size will be fixed at 64M.
Configuration options: [Disabled] [Enabled]
DVMT Pre-Allocated
This item allows you to select the DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory
size used by the Internal Graphics Device.
Configuration options: [32M] - [1024M]
RC6(Render Standby)
This item allows you to enable render standby support.
Configuration options: [Disabled] [Enabled]
PEG Port Configuration
This item allows you to configure the PEG Port settings.
PCIEx16_1 Link Speed
This item allows you to configure the PCIEx16_1 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_2 Link Speed
This item allows you to configure the PCIEx16_2 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
To Next Page
Loading...
