60
ROG STRIX Z490-E BIOS Manual
The following items appear only when Chassis Fan 1-2 Profile is set to [Manual].
Chassis Fan 1-2 Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the Chassis Fan 1-2
temperature. The Chassis Fan 1-2 will operate at the maximum duty cycle
when the temperature source is higher than the limit.
Chassis Fan 1-2 Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum Chassis Fan 1-2 duty
cycle. When the temperature source reaches the upper limit, the Chassis
Fan 1-2 will operate at the maximum duty cycle.
Chassis Fan 1-2 Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the Chassis Fan 1-2
temperature.
Chassis Fan 1-2 Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the Chassis Fan 1-2 middle duty cycle.
Chassis Fan 1-2 Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the Chassis Fan 1-2
temperature. The Chassis Fan 1-2 will operate at the minimum duty cycle
when the temperature source is lower than the limit.
Chassis Fan 1-2 Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum Chassis Fan 1-2 duty
cycle. When the temperature source is under the limit, the Chassis Fan
1-2 will operate at the minimum duty cycle.
M.2 Fan Q-Fan Control
[Disabled] Disable the M.2 Fan Q-Fan control feature.
[Auto] Detects the type of M.2 Fan Q-Fan installed and automatically
switches the control modes.
[DC mode] Enable the M.2 Fan Q-Fan control in DC mode for 3-pin chassis
fan.
[PWM mode] Enable the M.2 Fan Q-Fan control in PWM mode for 4-pin
chassis fan.
The following items appear only when M.2 Fan Q-Fan Control is set to [Auto], [DC
mode], or [PWM mode].
M.2 Fan Q-Fan Source
The assigned fan will be controlled according to the selected temperature
source.
Configuration options: [CPU] [MotherBoard] [Chipset] [T_Sensor] [Multiple
Sources]
For Multiple Sources, select up to three temperature sources and the fan will automatically
change based on the highest temperature.
To Next Page
Loading...
