ROG STRIX Z690-A GAMING WIFI
2-11
Chapter 2
• To install an M.2 to M.2_2, M.2_3, and M.2_4 slot
For 2280 and 22110 length
A. (optional) Remove the pre-installed removable M.2 Q-Latch screw at the
2280 length screw hole.
Follow step A only when you wish to install an 22110 length M.2 to M.2_3.
B. (optional) Install the bundled M.2 rubber pad if you are installing a single
sided M.2 storage device. DO NOT install the bundled M.2 rubber pads
when installing a double-sided M.2 storage device. The rubber pad installed
by default is compatible with double sided M.2 storage devices.
C. Rotate and adjust the M.2 Q-latch so that the handle points away from the
M.2 slot.
D. Install your M.2 to the M.2 slot.
E. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
OPTIONAL
To Next Page
Loading...
