ROG STRIX Z690-E GAMING WIFI
2-11
Chapter 2
• To install an M.2 to M.2_3 slot
For 2280 length
A. (optional) Install the bundled M.2 rubber pad if you are installing a single
sided M.2 storage device. DO NOT install the bundled M.2 rubber pads
when installing a double-sided M.2 storage device. The rubber pad installed
by default is compatible with double sided M.2 storage devices.
B. Rotate and adjust the M.2 Q-latch so that the handle points away from the
M.2 slot.
C. Install your M.2 to the M.2 slot.
D. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
OPTIONAL
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
