2-12
Chapter 2: Basic Installation
Chapter 2
For 2242, 2260 length
A. (optional) Remove the M.2 rubber pad.
Follow this step only if you wish to install an M.2 to type 2242.
B. Install the M.2 Q-Latch to the M.2 length screw hole you wish to install your
M.2 to.
C. Rotate and adjust the M.2 Q-latch so that the handle points away from the
M.2 slot.
D. Install your M.2 to the M.2 slot.
E. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
