2-16
Chapter 2: Basic Installation
Chapter 2
2.1.5 Additional cooling kit installation
To install the VRM fan holder
• You may install a 12V (1A, 12W), 40mm x 40mm fan onto the fan holder if you
require additional cooling for your motherboard.
• The fan is purchased separately.
To install the DDR5 fan holder
• You may install 12V (1A, 12W), 40mm x 40mm/50mm x 50mm/60mm x 60mm fans
onto the fan holder if you require additional cooling for your motherboard.
• The fan is purchased separately.
To Next Page
Loading...
