Asus SABERTOOTH 55i - Motherboard - ATX - Page 120

5-4 Chapter 5: Multiple GPU technology support
Chapter 5
Enabling Dual CrossFireX technology
1. In the Catalyst Control Center window,
click Graphics Settings > CrossFireX >
Congure.
2. From the Graphics Adapter list, select
the graphics card to act as the display
GPU.
3. Select
Enable CrossFireX.
4. Click
Apply, and then click OK to exit
the window.
Enabling Triple CrossFireX technology
1. In the Catalyst Control Center window,
click Graphics Settings > CrossFireX >
Congure.
2. From the Graphics Adapter list, select
the graphics card to act as the display
GPU.
3. Select
Enable CrossFireX.
4. From the list, select the appropriate GPU
combination to apply the CrossFireX
technology.
5. Click
Apply, and then click OK to exit
the window.
1
2
3
4
1
2
3
5
4