Asus SABERTOOTH 55i - Motherboard - ATX - Drive Xpert Configuration

3-36 Chapter 3: BIOS setup
Chapter 3
Changed Mode
This item appears only when you select a Drive Xpert mode to update and displays the
Drive Xpert mode that you have changed.
Ultra Space
This item appears only when you have created a drive partition using the Ultra Space
function.
Drive Xpert Mode Update:
Update To Super Speed [Press Enter]
Allows you to use the Super Speed function that combines two hard drives as one
single drive partition.
All original data of the two hard drives will be erased for Super Speed setup.
Update To EZ Backup [Press Enter]
Allows you to use the EZ Backup function that copies and maintains an identical
image of data from the SATA_E1 (orange) drive to the SATA_E2 (white) drive.
All original data of the SATA_E2 (white) hard disk will be erased for EZ Backup setup.
Drive Xpert conguration
Drive Xpert Group :
Current Mode :Normal Mode
Driver Xpert Mode Update:
Update To Super Speed [Press Enter]
Update To EZ Backup [Press Enter]
Update To Normal Mode [Press Enter]
Drive Xpert Device(s) List :
SATA_E1 (Orange) : [ST380817AS]
SATA_E2 (White) : [ST380817AS]
BIOS SETUP UTILITY
Tools
Update Drive Xpert
Mode changes after
saving changes and
exiting BIOS setup.
Discard Drive Xpert
Mode changes after
exiting BIOS setup
without saving any
changes.
3.9.2 Drive Xpert Conguration
• Before using the Drive Xpert function, ensure that you have connected the SATA
signal cables and installed SATA hard disk drives to the SATA_E1 (orange) and
SATA_E2 (white) connectors.
• You can only make one Drive Xpert change a time before you save BIOS settings and
restart the computer.
Drive Xpert Group:
Current Mode
Displays the current Drive Xpert mode.