Asus SABERTOOTH Z170 MARK 1 - Monitor Menu

3-38
Chapter 3: BIOS Setup
Chapter 3
3.7 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the other BIOS items.
Thermal Radar Temperature / CPU Temperature / EXT_SENSOR1-3
Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the CPU, thermal radar,
and EXT_SENSOR1-3 temperatures. Select [Ignore] if you do not wish to display the
detected temperatures.
CPU Fan Speed, CPU Optional Fan Speed, Water Pump Speed, Chassis Fan
1-6 Speed, ASST Fan 1-3 Speed, Extension Fan 1-3 Speed [xxxx RPM] or
[Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU, chassis,
and power fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the eld shows N/A. Select [Ignore] if you do not wish to display the detected
speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignore] if you do not want to detect this item.