SABERTOOTH Z170 S
1-23
Chapter 1
7. Front panel audio connector (10- pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
• We recommend that you connect a high-denition front panel audio module to this
connector to avail the motherboard’s high-denition audio capability.
• If you want to connect a high-denition or an AC
`97 front panel audio module to this
connector, set the Front Panel Type item in the BIOS setup to [HD Audio] or [AC97].
To Next Page
Loading...
