Asus SABERTOOTH Z170 - Page 87

SABERTOOTH Z170 S
3-23
Chapter 3
IA DC Load Line [Auto]
This item allows you to set the DC loadline dened in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Conguration options: [Auto] [0.01] - [62.49]
Tweaker’s Paradise
FCLK Frequency [Auto]
Conguration options: [Auto] [Normal (800MHz)] [1 GHz] [400MHz]
Initial BCLK Frequency [Auto]
This item allows you to set the initial BCLK (base clock) frequency to start overclocking
from the assigned BCLK frequency.
Conguration options: [Auto] [40.0 MHz] – [650.0 MHz]
BCLK Amplitude [Auto]
This item allows you to set the magnitude of the base clock driven for the processor.
Conguration options: [Auto] [700mV] [800mV] [900mV] [1000mV]
BCLK Slew Rate [Auto]
This item allows you to set the speed at which each clock rises and falls.
Conguration options: [Auto] [1.5V/ns] [2.5V/ns] [3.5V/ns] [4.5V/ns]
BCLK Spread Spectrum [Auto]
This item allows you to reduce the EMI. Disable to get more accurate base clocks.
Conguration options: [Auto] [Disabled] [-0.22] [-0.34] [-0.46] [+0.12] [+0.22] [+0.28]
[+0.38] [+0.17]
BCLK Frequency Slew Rate [Auto]
This item allows you to set frequency update rate. Lower values speed up clock
changes.
Conguration options: [Auto] [Disable] [32us/MHz] [64us/MHz] [128us/MHz] [512us/
MHz]
VPPDDR Voltage [Auto]
Conguration options: [Auto] [1.865] - [3.135]
DMI Voltage [Auto]
Conguration options: [Auto] [0.300] - [1.900]
Internal PLL Voltage [Auto]
Conguration options: [Auto] [0.900] - [1.845]
CPU Core/Cache Current Limit Max. [Auto]
This item allows you to congure a higher current limit to prevent a frequency or power
throttling when overclocking. Use the <+> and <-> keys to adjust the value.
Conguration options: [Auto] [0.00] - [255.50]
Min. CPU Cache Ratio [Auto]
This item allows you to set the minimum possible CPU cache ratio. Use the <+> and <-> keys
to adjust the value.
Conguration options: [Auto] [8] - [33]