Asus SABERTOOTH Z87 - DMI Configuration; Memory Configuration

3-32
Chapter 3: BIOS setup
Chapter 3
Render Standby [Auto]
Allows you to enable the Intel
®
Graphics Render Standby support to reduce
iGPU power use when the system is idle.
Conguration options: [Auto] [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable both integrated and discrete graphics for multi-monitor output.
The iGPU shared system memory size will be xed at 64MB.
Conguration options: [Disabled] [Enabled]
DMI Conguration
Allows you to control various DMI (Desktop Management Interface) functions.
DMI Gen 2 [Auto]
Allows you to enable or disable DMI Gen 2.
Conguration options: [Auto] [Enabled] [Disabled]
NB PCIe Conguration
Allows you to congure the NB PCI Express settings.
PCIEx16_1/2 Link Speed [Auto]
Allows you to congure the PCIEx16 speed for slots 1 and 2.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
DMI Link ASPM Control [Auto]
Allows you to enable or disable the control of Active State Power Management on SA
side of the DMI Link.
Conguration options: [Auto] [Disabled] [L0s] [L1] [L0sL1]
PEG - ASPM [Disabled]
Allows you to control ASPM support for the PEG device.
Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
Memory Conguration
Allows you to congure the memory conguration parameters.
Memory Scrambler [Enabled]
Allows you to enable or disable the Memory Scrambler support.
Conguration options: [Enabled] [Disabled]
Memory Remap [Enabled]
Allows you to enable remapping the memory above 4GB.
Conguration options: [Enabled] [Disabled]