Asus SABERTOOTH Z97 MARK 2/USB 3.1 - System Agent Configuration

ASUS SABERTOOTH Z97 MARK 2/USB 3.1
3-37
Chapter 3
3.6.4 System Agent Conguration
Graphics Conguration
This item allows you to select a primary display from CPU and PCIe graphical devices.
Primary Display [Auto]
This item allows you to select the primary display from CPU and PCIe devices.
Conguration options: [Auto] [CPU Graphics] [PCIE]
CPU Graphics Multi-Monitor [Disabled]
This item allows you to enable the iGPU Multi-Monitor. The iGPU shared system
memory size is xed 64 MB.
Conguration options: [Disabled] [Enabled]
DMI Conguration
This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed.
DMI Gen 2 [Enabled]
Set this item to [Enabled] to run DMI at PCI-E 2.0 speed.
Conguration options: [Enabled] [Disabled]
NB PCIe Conguration
This item allows you to congure the NB PCI Express settings.
PCIEx16_1/2 Link Speed [Auto]
This item allows you to congure the PCIEx16 speed for slots 1 and 2.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
Memory Conguration
This item allows you to congure the memory conguration parameters.
Memory Scrambler [Enabled]
Set this item to [Enabled] to support high frequency DRAMs for a better stability.
Conguration options: [Enabled] [Disabled]
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64-bit operating
systems.
Conguration options: [Enabled] [Disabled]