Asus SABERTOOTH Z97 MARK 2/USB 3.1 - USB 3.1 Boost

ASUS SABERTOOTH Z97 MARK 2/USB 3.1
4-19
Chapter 4
4.4.5 USB 3.1 Boost
USB3.1BoosttechnologysupportsUASP(USBAttachedSCSIProtocol)thatautomatically
speedsupthetransferratesofyourUSBstoragedevices.
Launching USB 3.1 Boost
TolaunchUSB3.1Boost,clickortap onthetop-rightcorneroftheAISuite3main
menu,thenselectUSB 3.1 Boost.
Using the USB 3.1 Boost
• USB3.1BoostautomaticallydetectstheUSB3.1/3.0devicesthatsupportUASP.
• ThedatatransferspeedvarieswithUSBdevices.Forahigherdatatransfer
performance,useaUSB3.1device.
Click or tap to select a USB device
Click or tap to enable the USB
device’s normal data transfer rate
Click or tap to enable UASP or
Turbo Mode for a faster data
transfer rate
EnsuretoconnectyourUSB3.1devicetotheUSB3.1portsthatsupportUSB3.1Boost.
Refertosection2.3.1 Rear I/O connectionofyouruserguideformoredetails.