Asus STRIX Z270G GAMING - Rear I;O Connection Diagram

54
ROG STRIX Z270G GAMING BIOS Manual
W_PUMP+ Control
[Disabled] Disable the W_PUMP+ control feature.
[Auto] Detects the type of W_PUMP+ installed and automatically
switches the control modes.
[DC mode] Enable the W_PUMP+ control in DC mode for 3-pin chassis fan.
[PWM mode] Enable the W_PUMP+ control in PWM mode for 4-pin chassis
fan.
The following items appear only when you set the W_PUMP+ Control to [Auto], [DC
mode] or [PWM mode].
W_PUMP+ Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the W_PUMP+
temperature.
W_PUMP+ Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum W_PUMP+ duty cycle.
When the CPU temperature reaches the upper limit, the W_PUMP+ will
operate at the maximum duty cycle.
W_PUMP+ Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the W_PUMP+
temperature.
W_PUMP+ Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum W_PUMP+ duty cycle.
When the CPU temperature reaches the upper limit, the W_PUMP+ will
operate at the maximum duty cycle.
W_PUMP+ Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the W_PUMP+
temperature. The W_PUMP+ will operate at the minimum duty cycle when
the temperature is lower than the limit.
W_PUMP+ Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum W_PUMP+ duty cycle.
When the CPU temperature is under the limit, the W_PUMP+ will operate
at the minimum duty cycle.