Asus TUF GAMING B560M-PLUS WIFI - Product Introduction; Before You Proceed; Motherboard Overview

ASUS TUF GAMING B560M-PLUS WIFI
1-1
Product Introduction
1
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
1.2 Motherboard overview
Place this
side towards
the rear of the
chassis
DDR4 DIMM_A1 (64bit, 288-pin module) DDR4 DIMM_A2* (64bit, 288-pin module) DDR4 DIMM_B1 (64bit, 288-pin module) DDR4 DIMM_B2* (64bit, 288-pin module)
DIGI+
VRM
CPU_FAN
CPU_OPT
COM_DEBUG
CHA_FAN2
CHA_FAN1
TB_HEADER
RGB_HEADER1
RGB_HEADER2
ADD GEN 2_1
PANEL
AAFP
CLRTC
SATA6G_6 SATA6G_5
SATA6G_3 SATA6G_2 SATA6G_1
SATA6G_4
128Mb
BIOS
ATX_12V
ATX_PWR
U32G1_56
U32_4
BATTERY
LAN_U32G2_12
USB_E5_71011
U32G1_E12
U32G1_EC3
HDMI
_DP
ASM
1442K
AUDIO
Ethernet
CNVI(WIFI)
Super
I/O
PCIEX1
M.2_1(SOCKET3)
M.2_2(SOCKET3)
2280 2260 2242
AURA
228022602242
PCIEX16_2
PCIEX16_1
USB_E34USB_E12
COM
24.4cm(9.6in)
24.4cm(9.6in)
Intel
®
B560
M.2_2(SOCKET3)
PCIE SATA IRST
3.0 X4 V V
LGA1200
BOOT
VGA
DRAM
CPU
M.2_1(SOCKET3)
PCIE SATA
4.0 X4
RAID ON CPU
X X
Audio
CODEC
ADD GEN 2_2
9
8
6
13
7
5
4 12 111415
3
5 16 24
74171610
18 1112
The pin denitions in this chapter are for reference only. The pin names depend on the
location of the header/jumper/connector.