1-15Motherboard User Manual
5. Remove the plastic film from the thermal pads on the bottom of the heatsinks.
If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it
with a thermal pad with a thickness of 1.25mm.
6. Replace the heatsinks.
7. Secure the heatsinks using the screws on the heatsinks.
5
7 7
7 7
6
6
For 2242, 2260 length
A. Install the bundled screw stand to the M.2 length screw hole you wish
to install your M.2 to.
B. Install your M.2 to the M.2 slot.
C. Secure your M.2 using the bundled screw stand’s screw.
A
B
C
To Next Page
Loading...
