Asus TUF X299 MARK 1 - Page 33

ASUS TUF X299 MARK 1
1-17
Chapter 1
5. USB 2.0 connector (10-1 pin USB1314)
ThisconnectorisforUSB2.0ports.ConnecttheUSBmodulecabletothisconnector,
theninstallthemoduletoaslotopeningatthebackofthesystemchassis.ThisUSB
connectorcomplieswithUSB2.0specicationthatsupportsupto480Mb/sconnection
speed.
6. Thermal sensor connector (2-pin T_SENSOR1-3)
Theseconnectorsareforthethermistorcablethatmonitorsthetemperatureofthe
devicesandthecriticalcomponentsinsidethemotherboard.Connectthethermistor
cableandplacethesensoronthedeviceorthemotherboardscomponenttodetectits
temperature.