Asus TUF X299 MARK 1 - Page 34

1-18
Chapter 1: Product Introduction
Chapter 1
7. CPU, CPU optional, assistant, water pump+, high amp, and chassis fan
connectors (4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin ASST_FAN; 4-pin W_PUMP+;
4-pin H_AMP_FAN; 4-pin CHA_FAN1-5)
Connectthefancablestothefanconnectorsonthemotherboard,ensuringthatthe
blackwireofeachcablematchesthegroundpinoftheconnector.
 TheCPU_FANconnectorsupportstheCPUfanofmaximum1A(12W)fanpower.
 TheCPU_FAN,CHA_FANandASST_FANconnectorssupporttheTUFThermal
Radar3feature.
 ForbetterQ-Fanfunctions,werecommendusing4-pinPWMfanswhenyouconnect
powerfulfans(1Aorabove)ontotheH_AMP_FANconnector.
 EnsuretodisableQ-Fanfunctionsifyouwanttoconnectpowerful3-pinDCfans(1A
orabove)ontotheH_AMP_FANconnector.
 W_PUMP+functionsupportdependsonwatercoolingdevice.
 DONOTforgettoconnectthefancablestothefanconnectors.Insufcientairow
insidethesystemmaydamagethemotherboardcomponents.Thesearenotjumpers!
Donotplacejumpercapsonthefanconnectors!
 EnsurethattheCPUfancableissecurelyinstalledtotheCPUfanconnector.