Asus TUF X299 MARK 1 - 3.7 Monitor menu; 3.8 Boot menu

3-20
Chapter 3: BIOS Setup
Chapter 3
3.7 Monitor menu
TheMonitormenudisplaysthesystemtemperature/powerstatus,andallowsyoutochange
thefansettings.
Q-fan Configuration
Q-fan Tuning
Clickthisitemtoautomaticallydetectthelowestspeedandconguretheminimum
dutycycleforeachfan.
AIO PUMP / W_PUMP+ Control
[Disabled] DisabletheWaterPumpcontrolfeature.
[Auto] Detectsthetypeofwaterpumpinstalledandautomaticallyswitches
thecontrolmodes.
[DCmode] EnabletheWaterPumpcontrolinDCmodefor3-pinchassisfan.
[PWMmode] EnabletheWaterPumpcontrolinPWMmodefor4-pinchassisfan.
3.8 Boot menu
TheBootmenuitemsallowyoutochangethesystembootoptions.
Fast Boot
[Disabled] Allowsyoursystemtogobacktoitsnormalbootspeed.
[Enabled] Allowsyoursystemtoacceleratethebootspeed.
ThefollowingitemsappearonlywhenyousettheFastBootto[Enabled].
Next Boot after AC Power Loss
[NormalBoot] ReturnstonormalbootonthenextbootafteranACpowerloss.
[FastBoot] AcceleratesthebootspeedonthenextbootafteranACpowerloss.
3.6.13 PCH-FW Configuration
ThisitemallowsyoutocongurethermwareTPM.