Asus TUF X299 MARK 2 - Page 32

1-16
Chapter 1: Product Introduction
Chapter 1
5. USB 2.0 connector (10-1 pin USB1314)
ThisconnectorisforUSB2.0ports.ConnecttheUSBmodulecabletothisconnector,
theninstallthemoduletoaslotopeningatthebackofthesystemchassis.ThisUSB
connectorcomplieswithUSB2.0specicationthatsupportsupto480Mb/sconnection
speed.
6. Thermal sensor connector (2-pin T_SENSOR)
Theseconnectorsareforthethermistorcablethatmonitorsthetemperatureofthe
devicesandthecriticalcomponentsinsidethemotherboard.Connectthethermistor
cableandplacethesensoronthedeviceorthemotherboard’scomponenttodetectits
temperature.