Asus TUF Z270 Mark 1 - Page 34

1-18
Chapter 1: Product Introduction
Chapter 1
6. CPU, water pump, high amp, CPU optional, assistant fan, extension, and chassis
fan connectors (4-pin CPU_FAN; 4-pin W_PUMP+; 4-pin CPU_OPT; 5-pin EXT_
FAN; 4-pin H_AMP_FAN; 4-pin CHA_FAN1-5; 4-pin ASST_FAN)
Connectthefancablestothefanconnectorsonthemotherboard.
•  DONOTforgettoconnectthefancablestothefanconnectors.Insufcientair
owinsidethesystemmaydamagethemotherboardcomponents.Thesearenot
jumpers!Donotplacejumpercapsonthefanconnectors!
•  EnsurethattheCPUFANcableissecurelyinstalledtotheCPUfanconnector.
• TheCPU_FANconnectorsupportstheCPUfanofmaximum1A(12W)fanpower.
• TheCPU_FAN,CHA_FANandASST_FANconnectorssupporttheTUFThermal
Radar2+feature.
• ForbetterQ-Fanfunctions,werecommendusing4-pinPWMfanswhenyouconnect
powerfulfans(1Aorabove)ontotheH_AMP_FANconnector.
• EnsuretodisableQ-Fanfunctionsifyouwanttoconnectpowerful3-pinDCfans(1A
orabove)ontotheH_AMP_FANconnector.
•  W_PUMP+functionsupportdependsonwatercoolingdevice.