Asus TUF Z270 MARK 2 - Page 34

34
ASUS TUF Z270 MARK 2 BIOS Manual
FCLK Frequency for Early Power On
This item allows you to set the FCLK Frequency for Early Power On.
Conguration options: [Auto] [Normal (800MHz)] [1GHz] [400MHz]
CPU Core/Cache Current Limit Max.
This item allows you to congure a higher current limit to prevent a frequency or power
throttling when overclocking. Use the <+> and <-> keys to adjust the value.
Conguration options: [Auto] [0.00] - [255.50]
CPU Graphics Current Limit
This item allows you to set a high current limit to prevent frequency or power throttling during
overclocking.
Conguration options: [Auto] [0.00] - [255.50]
Min. CPU Cache Ratio
This item allows you to set the minimum possible CPU cache ratio. Use the <+> and <-> keys
to adjust the value.
Conguration options: [Auto] [8] - [33]
Max. CPU Cache Ratio
This item allows you to set the maximum possible CPU cache ratio. Use the <+> and <->
keys to adjust the value.
Conguration options: [Auto] [8] - [33]
Max. CPU Graphics Ratio
This item allows you to congure the CPU graphics ratio. Use the <+> and <-> keys to adjust
the value. The ratio may vary depending on the system loading.
Conguration options: [Auto] [1] - [60]
Extreme Over-voltage
Enable this item to allow higher voltages for overclocking, but the CPU lifetime will not be
guaranteed.
Conguration options: [Disabled] [Enabled]
This item can only be enabled when the onboard CPU_OV jumper is switched on.
BCLK Aware Adaptive Voltage
When this option is enabled, pcode will be aware of the BCLK frequency when calculating the
CPU V/F curves. This is ideal for BCLK OC to avoid high voltage overrides. Uses OC Mailbox
command 0x15.
Conguration options: [Auto] [Enabled] [Disabled]