Asus TUF Z270 MARK 2 - Page 43

ASUS TUF Z270 MARK 2 BIOS Manual
43
1.6.3 System Agent (SA) Configuration
SA - PCI Express
DMI Link ASPM Control
This item allows you to enable or disable the control of Active State Power Management on
SA side of the DMI Link.
Conguration options: [Disabled] [L1]
PEG - ASPM
This item allows you to select the ASPM state for energy-saving conditions, or use the ASUS
optimized energy saving prole.
Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
VT-d
Allows you to enable virtualization technology function on memory control hub.
Conguration options: [Disabled] [Enabled]
Graphics Configuration
This item allows you to select a primary display from CPU and PCIe graphical devices.
Primary Display
This item allows you to select the primary display from CPU and PCIe devices.
Conguration options: [Auto] [IGFX] [PEG]
iGPU Multi-Monitor
This item allows you to enable the iGPU Multi-Monitor. The iGPU shared system
memory size is xed at 64 MB.
Conguration options: [Disabled] [Enabled]
RC6(Render Standby)
This item allows you to enable check of render standby support.
Conguration options: [Disabled] [Enabled]
DVMT Pre-Allocated
This item allows you to select the DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory
size used by the Internal Graphics Device.
Conguration options: [32M] - [1024M]