Asus TUF Z270 MARK 2 - Page 54

54
ASUS TUF Z270 MARK 2 BIOS Manual
Q-Fan Configuration
Q-fan Tuning
Select this item and press <Enter> to automatically detect the lowest speed and
congure the minimum duty cycle for each fan.
CPU Q-Fan Control
This item allows you to set the CPU Q-Fan operating mode.
[Disabled] Disables the Q-Fan control.
[Auto] Detects the type of CPU fan installed and automatically switches the
control modes.
[DC Mode] Enables the CPU Q-Fan control in DC mode for 3-pin CPU fan.
[PWM Mode] Enables the CPU Q-Fan control in PWM mode for 4-pin CPU fan.
The following items appear only when you set the CPU Q-Fan Control to [Auto], [PWM
Mode], and [DC Mode].
CPU Fan Step Up
This item allows you to set the value of CPU Fan Step Up.
Conguration options: [0 sec] [2.1 sec] [2.8 sec] [3.6 sec] [4.2 sec]
[5.0 sec] [6.3 sec] [8.5 sec] [12 sec] [25 sec]
CPU Fan Step Down
This item allows you to set the value of the CPU Fan Step Down.
Conguration options: [0 sec] [2.1 sec] [2.8 sec] [3.6 sec] [4.2 sec]
[5.0 sec] [6.3 sec] [8.5 sec] [12 sec] [25 sec]
CPU Fan Speed Low Limit
This item allows you to set the low limit warning for the CPU fan speed.
Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM]
[500 RPM] [600 RPM]
CPU Fan Profile
This item allows you to set the appropriate performance level of the CPU
fan.
[Standard] Set to make the CPU fan adjust automatically depending on
the CPU temperature.
[Silent] Set to minimize the fan speed for quiet CPU fan operation.
[Turbo] Set to achieve maximum CPU fan speed.
[Manual] Set to assign the detailed fan speed control parameters.
The following items appear only when you set the CPU Fan Prole to [Manual].