Asus TUF Z270 MARK 2 - Creating a RAID Driver Disk; Creating a RAID Driver Disk in Windows

4-10
Chapter 4: RAID Support
Chapter 4
Exiting the Intel
®
Rapid Storage Technology Option ROM utility
Toexittheutility:
1. From the utility main menu, select 6. Exit, then press <Enter>. The following warning
messageappears:
2. Press <Y> to exit or press <N> to return to the utility main menu.
Are you sure you want to exit? (Y/N):
[CONFIRM EXIT]
4.2 Creating a RAID driver disk
4.2.1 Creating a RAID driver disk in Windows
®
To install the RAID driver for Windows
®
OS:
1. During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
2. InserttheUSBashdrivewithRAIDdriverintotheUSBportorthesupportDVDinto
the optical drive, and then click Browse.
3. Click the name of the device you’ve inserted, go to Drivers > RAID, and then select
the RAID driver for the corresponding OS version. Click OK.
4. Follow the succeeding screen instructions to complete the installation.
BeforeloadingtheRAIDdriverfromaUSBashdrive,youhavetouseanothercomputer
tocopytheRAIDdriverfromthesupportDVDtotheUSBashdrive.
To set up a Windows
®
UEFI operating system under RAID mode, ensure to load the UEFI
driver for your optical drive.