Asus TUF Z370-PLUS GAMING - Page 66

ASUS TUF Z370-PLUS GAMING
3-17
Chapter 3
CPU Power Duty Control
DIGI + VRM Duty control adjusts the current and thermal conditions of every
component’s phase.
[T. Probe] Select to maintain the VRM thermal balance.
[Extreme] Select to maintain the current VRM balance.
CPU Power Phase Control
This item allows you to set the power phase control of the CPU. Conguration options:
[Auto] [Standard] [Extreme]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
CPU Graphics Load-Line Calibration
Load-line is dened by Intel VRM specication and affects the CPU Graphics power
voltage. The CPU Graphics working voltage will decrease proportionally depending on
the CPU Graphics loading. Higher levels of the load-line calibration can get a higher
voltage and a better overclocking performance but increases the CPU Graphics and
VRM thermal. Select from level 1 to 7 to adjust the CPU Graphics power voltage from
0% to 100%. Conguration options: [Auto] [Level 1] [Level 2] [Level 3] [Level 4] [Level
5] [Level 6] [Level 7]
The boosted performance may vary depending on the CPU Graphics specication. Do not
remove the thermal module.
CPU Graphics Current Capability
Allows you to congure the total power range, and extends the overclocking frequency
range simultaneously. Conguration options: [Auto] [100%] [110%] [120%] [130%]
[140%]
Choose a higher value when overclocking, or under a high GT loading for extra power
support.
CPU Graphics VRM Switching Frequency
This item affects the CPU Graphics transient response speed and the component
thermal production. Select [Manual] to congure a higher frequency for a quicker
transient response speed. Conguration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.
The following item appears only when you set the CPU Graphics VRM Switching
Frequency to [Manual].
Fixed CPU Graphics Switching Frequency (KHz) [250]
This item allows you to set a higher frequency for a quicker transient
response speed. Use the <+> and <-> keys to adjust the value. The values
range from 250KHz to 500KHz with a 50KHz interval.
CPU Graphics Power Duty Control