Asus TUF Z390-PLUS GAMING - Page 61

TUF Z390-PLUS GAMING
3-15
Chapter 3
We recommend you to set the value based on the CPU specication, as high BCLK
frequencies may damage the CPU permanently.
BCLK Spread Spectrum [Auto]
This item allows you to enhance the BCLK overclocking capability or reduce the EMI
(electromagnetic disturbance) generated by the BCLK. Set this item to [Enabled]
for EMI reduction, or set this item to [Disabled] to enhance BCLK overclocking.
Conguration options: [Auto] [Disabled] [Enabled]
ASUS MultiCore Enhancement
[Auto] This item allows you to maximize the oveclocking performance optimized
by ASUS core ratio settings.
[Disabled] This item allows you to set to default core ratio settings.
SVID Behavior [Auto]
This item allows you to program the CPU’s SVID behavior base on CPU’s quality.
Conguration options: [Auto] [Best-Case Scenario] [Typical Scenario] [Worst-Case Scenario]
[Intel’s Fail Safe].
CPU Core Ratio
This item allows you to set the CPU core ratios. Conguration options: [Auto] [Sync All Cores]
[Per Core]
DRAM Odd Ratio Mode
Allows you to enable or disable the Odd Ratio Mode, which provides better granularity.
Conguration options: [Disabled] [Enabled]
DRAM Frequency
This item allows you to set the memory operating frequency. The congurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting. Conguration options: [Auto] [DDR4-800MHz] - [DDR4-8533MHz]
OC Tuner
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance. It also accelerates the CPU graphics performance to
the extreme depending on the CPU graphics loading. Conguration options: [Keep Current
Settings] [Ratio Tuning] [BCLK + Ratio Tuning]
Ensure that you installed an efcient CPU fan for CPU and graphics loading before
selecting either [Ratio Tuning] or [BCLK + Ratio Tuning]. To keep the current
overclocking tuner status, select [Keep Current Settings].
Power-saving & Performance Mode
Allows you to selects the power-saving mode or performance mode. Conguration options:
[Auto] [Max Power-Saving Mode] [Performance mode]
DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.