1-14
Chapter 1: Product Introduction
Chapter 1
2. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
HD Audio standard. Connect one end of the front panel audio I/O module cable to this
connector.
We recommend that you connect a high-denition front panel audio module to this
connector to avail of the motherboard’s high-denition audio capability.
3. USB 3.1 Gen 1 connectors (20-1 pin U31G1_78; U31G1_910)
These connectors allow you to connect a USB 3.1 Gen 1 module for additional USB
3.1 Gen 1 front or rear panel ports. With an installed USB 3.1 Gen 1 module, you can
enjoy all the benets of USB 3.1 Gen 1 including faster data transfer speeds of up to
5 Gb/s, faster charging time for USB-chargeable devices, optimized power efciency,
and backward compatibility with USB 2.0.
The USB 3.1 Gen 1 module is purchased separately.
To Next Page
Loading...
