Disassembly Procedure
3
⚫ ASUS is not responsible for direct, indirect, intentional o unintentional damages
resulting from improper installation and operation.
⚫ Carefully read through this Service Guide for a look at various components of the
device before performing any service and repairs.
⚫ To provide the best service, we have provided the below information for technicians
from distributors and resellers to perform the complete device disassembly and
assembly. Before performing the procedures, please be sure to read through the
overview in this service guide for component overview to avoid any unwarranted
damages to the device hardware.
⚫ Due to sales policy difference, the components might have different specifications
on the same series product, please refer to E-manual by model.
⚫ Before handling components, use a grounded wrist strap or touch a safely grounded
object to avoid damaging them due to static electricity.
⚫ Keep liquids or moisture away from your device to avoid short circuits.
⚫ Remove rings, watches, and any other metal objects from your hands.
⚫ Hold components by the edges to avoid touching the ICs.
⚫ Properly install all components before connecting the AC power.
⚫ Do not use power adapters or batteries from other devices to reduce the risk of
injury to persons due to fire or explosion.
Use only certified power adapters or batteries supplied by the manufacturer or
authorized retailers.
⚫ Detach all clips or flaps before removing cables to prevent damage.
⚫ Use the correct screw models on your device to prevent damage.
⚫ Fully remove all adhesive residue after removing and before installing any
components.
⚫ Photograph the appearance of cables, cable routing, connectors, and screws for
later reference before proceeding with each step.
To Next Page
Loading...
