Disassembly Procedure
5
Service Overview
Please pay special attention to the cautions below to prevent any damages to the notebook and
please be sure to select the appropriate tools described in this section to perform any services
desired.
Precautions
Before you perform any service or repair on the notebook, please follow the steps below first.
1. Be sure that the notebook is powered down.
2. Disconnect the AC plug from the notebook.
3. Remove all rings, watches and any other metal objects from your hands.
4. Always wear a ground strap on your hand to protect the notebook from static discharge.
5. Please refer to “ANSI ESD S20.20” about ESD protection measure.
6. Put disassemble the parts in the functional PE BAG for avoid any damages of the
A/B/C/D part.
7. Environment temperature is 20-30 ℃ and humidity is 40% - 70%.
8. Avoid scratching the surface of the machine; please use anti-static and soft materials to
put on desk in repair environment as below photo.
To Next Page
Loading...
