1-4 Chapter 1: System introduction
1.3 Rear panel
The system rear panel includes the power connector and several I/O ports that
allow convenient connection of devices.
1. Power connector.
This connector is for the power cable and plug.
2. Voltage selector.
This switch allows you to adjust the system input voltage
according to the voltage supply in your area. See the section “Voltage
selector” on page 1-6 before adjusting this switch.
3. PS/2 mouse port.
This green 6-pin connector is for a PS/2 mouse.
4. PS/2 keyboard port.
This purple 6-pin connector is for a PS/2 keyboard.
5. Serial port.
This 9-pin COM port is for serial devices
6. Parallel port. This 25-pin port connects a printer, scanner, or other devices.
7. VGA port.
This port connects a VGA monitor.
9
10
1
2
4
6
7
3
12
13
11
5
14
8
16
15
To Next Page
Loading...
