Asus VG27W Series - Detaching the Arm (for VESA Wall Mount); Connecting the Cables

2-3ASUS VG27 Series LCD Monitor
2.3 Detaching the arm (for VESA wall
mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Loosen the four screws on the back of the monitor and remove the arm/base.
3. Use only the UL Listed Wall Mount Bracket with minimum weight/load
5.66kg (Screw size:M4*12mm)
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.4 Connecting the cables
Connect the cables as the following instructions:
•.
To connect the power cord:
a. Connect the power adapter securely to the monitor’s DC input.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
2
1
(Figure 2)
2
1
(Figure 1)