Asus VivoMini - Memory Module Installation; Cover Reassembly and Finalization

3
6. Alignandinsertthememorymoduleintotheslot(A)andpressitdown(B)untilitis
securely seated in place. Repeat the same steps to install the other memory module.
IMPORTANT! Always install into the lower slot rst.
7. Remove the screw you previously attached on the bottom cover.
8. Place the cover back on the bottom side of your VivoMini. Note that the cover can only
beinsertedinonedirection.Refertothefollowingillustrationandnotetoensurethat
the cover is securely tted on the bottom side of the VivoMini.
IMPORTANT!Therating
label area (A) and the
power button’s location
(B) must be oriented as
shown.