VivoPC VM40B
27
Installing a 2.5-inch SSD
Before you start, prepare the following items:
• 2.5-inch to 3.5-inch drive tray adapter
• Four (4) pieces of SSD screws
• Three (3) pieces of black screws
• Three (3) pieces of rubber heads for the black screws
• 2.5-inch SSD with the desired volume, speed or capacity
(purchased separately)
NOTE: The availability and quantity of these items vary with your
VivoPC package.
To install a 2.5-inch SSD:
1. Turn o your VivoPC.
2. Disconnect all cables and peripherals.
3. Place the VivoPC on a stable and at surface.
4. Press down latch at the rear panel to release the top cover.
To Next Page
Loading...
