Asus VK191 Series - Chapter 2: Setup; Detaching the Arm;Base (for VESA Wall Mount)

2-2 Chapter 2: Setup
2.3 Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of the VK191 Series LCD monitor is specially designed
for VESA wall mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes (Figure 1).
3. Follow the direction to remove the back lid (Figure 1). Use a screwdriver to
remove the four screws on the arm, then slide out the arm/base to detach it
from the monitor (Figure 2).
Arm/base
Rubbers in the
screw holes
Figure 1
Figure 2
Back lid
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.